Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 22.06.2025 11:52

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

But it can get overloaded, and no longer works.

Barnstars:

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

Adults with ADHD face long-term social and economic challenges, study finds — even with medication - PsyPost

This is where the MOV conducts again, and dissipated the energy.

There are three different concepts here that are getting confused.

what exactly is a ‘surge’ protector?

16ft great white shark found with perfectly circular hole in head – and we know exactly what caused it - BBC Wildlife Magazine

[old diagram got deleted by accident]

These devices are installed between the “hot” and “neutral” and protective ground.

2024–10–14 [Omar Gharbi Omar Gharbi ]

Quia et magnam illo.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

At least they know the answer if they wanted it.

What is lightning?

Alan Turing's iconic paper on a 'universal computing machine' goes up for auction - Live Science

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

He then describes Rainy Season and Lightning.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

Webb telescope detects water vapor on a planet outside the solar system smaller than Neptune - Earth.com

Can the fuse protect the electronic devices from lightning instead of a surge protector.

It also is a device that limits the change in current flow.

Edit 2024–10.

The FDA Launches Its Generative-AI Tool, Elsa, Ahead of Schedule - Gizmodo

One is “what exactly is in a ‘surge protector’ ? ”

a photo is worth a thousand words.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

What are the best free AI apps for animation?

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

A fuse is a non-resetable over current circuit protector.

Here is a simplified AC power diagram.

What’s up in the sky for June 2025? Arietid meteor shower, strawberry moon and much more - WTOP

He then asserts :

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

For this case there are devices called Metal oxide varistors (MOV).

If the United States leaves the EU to fend for themselves in the economy and NATO, could Europe become irrelevant in the global economy compare to China and America dominance in the world stage in AI and semiconductors? Will Europe become cash poor?

The MOV will conduct when the voltage exceeds 50% of line voltage.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

[image of Common-mode choke]

NASA warns: massive anomaly spreads across Earth, linked to mysterious forces beneath the surface - Glass Almanac

The other is “what does a “fuse” do?”

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

These are simplified answers to the original question, and does not change anything I wrote above.

Repellat quod recusandae rerum adipisci deleniti.

(Dc diagram shown, AC is similar).

nine

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

What do you do you do if your motorcycle chain snaps while riding on the highway?

This is 'the assistant's answer'

This one hit behind the barn.

I post the exact comment here.

Knicks' Decision to Fire Tom Thibodeau Was Brewing For 'Months' - Sports Illustrated

So, the voltage could go up to 500 volts, and the fuse will not open up.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

but I think this circuit , shows a few more pieces.

Breast cancer makes Hull man 'feel like an imposter' - BBC

The third is lightning and “how it gets conducted into a home.”

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

Should Trump pardon Andrew Tate when he wins the 2024 election?

At one ohm, the resistor has a maximum of 1 watt power.

2024–10–10[John johnson John Johnson ]

In schematic diagrams this is the symbol for a fuse:

First Sentence:

One

eight

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

Upvotes:

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

the problem then depends on "how fast does the fuse operate?".

This is the picture of an electronic coil of wire wound around a core of magnetic material.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

But… the neutral is now “floating” because of the 1 ohm resistance.

What does a fuse do?

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

so, what happens?

Now when you have a certain ac resistance, then a current flows in a loop.

There are two important concepts here.

2024–10–16 [ OO OLAOYE OYEBODE ]

A circuit breaker is similar, but is resettable.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

This device then solves the entire problem.

The bolt then partially travels down the line to your home.

He then describes the function of a fuse.

Because the load is inductive, the current lags the voltage.(by a bit).

This is where this question deviates from being a 'generic' question, and becomes more specific.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

It seems Mohan does not understand the difference between a comment and an Answer.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

An AC voltage/ current source, and an ac inductive load.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

but this device (an Inductor) … impedes the rapid changes in the current.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.